配比在2%摆布时导电率为1000摆布，PH值4.8-5.5之间。

When the ratio is about 2%, the conductivity is about 1000, and the PH value is between 4.8 and 5.5.

配比在3.5%摆布时的导电率为1470摆布，PH值4.8-5.5之间。

When the proportion is about 3.5%, the conductivity is about 1470, and the PH value is between 4.8 and 5.5.

配比在4%摆布时导电率为1500摆布，PH值4.8-5.5之间。

When the ratio is about 4%, the conductivity is about 1500, and the PH value is between 4.8 and 5.5.

利用环境 Usage Situation

水箱温度应坚持在10至15度，自来水的pH值影响较小，倡议配比在2%-4%之间。该产物合用于一切平版印刷机品牌（如海德堡、小森、三菱等），肇端配比为2.5%，若水质较硬可增添至3%-4%。包装有25L、200L和1吨桶，并可装置集合供水体系以主动配比，详细用量按照出产需要调剂。

The temperature of the water tank should be maintained at 10 to 15 degrees, and the pH value of tap water has a small impact. It is recommended to proportionate in a ratio between 2% and 4%. This product is suitable for all sheetfed printing machine brands (such as Heidelberg, Komori, Mitsubishi, etc.), with a starting ratio of 2.5%. If the water quality is hard, it can be increased to 3% -4%. The packaging comes in 25L, 200L, and 1-ton drums, and can be equipped with a centralized water supply system for automatic proportioning. The specific amount can be adjusted according to production needs.

利用操纵请求 Operation Requirements

在开印前，需按照无醇润版液和通俗润版液的差别，调剂印刷机的供水体系，包含确保下水辊均衡和恰当设置计量辊压力。起首，查抄并洗濯下水辊、墨辊和橡皮布，切勿利用洗车水或汽油。调剂不均衡的下水辊，防止单边干版。调剂计量辊压力后，微调下水量。清空并完全洗濯水箱，坚持温度在10度，倡议每15-20个任务日洗濯一次。精确计较水箱内总水量，平均播入润版液后再倒入水中，补充时需按比例兑匀后再加入水箱，以避免影响结果。

Before printing, it is necessary to adjust the water supply system of the printing machine according to the difference between non-alcoholic and regular fountain solutions, including ensuring the balance of the water supply roller and setting the pressure of the metering roller appropriately. Firstly, check and clean the water roller, ink roller, and rubber blanket, and do not use Ink cleaner water or gasoline. Adjust the unbalanced water roller to avoid single-sided dry plate. After adjusting the pressure of the measuring roller, fine tune the amount of water added. Empty and thoroughly clean the water tank, keeping the temperature at 10 degrees. It is recommended to clean it every 15-20 working days. Accurately calculate the total water volume in the water tank, evenly pour in the fountain solution before pouring it into the water. When replenishing, it is necessary to mix it in proportion before adding it to the water tank to avoid affecting the effect.